62 Sun Fire X4150, X4250 and X4450 Servers Windows Operating System Installation Guide • January 2009
■ No configuration is required. IPMITool is ready for use.
For Windows Server 2003 R2 and R2 SP2:
■ Install the IPMI tool as described in “To Install Supplemental Software Using
the Installation Wizard” on page 54.
■ Install Microsoft’s IPMI System Management driver in Windows Server 2003
R2 or R2 SP2.
■ Configuration is required. Perform the steps described in “To Install
Microsoft’s IPMI System Management Driver (Windows Server 2003 R2 and R2
SP2)” on page 62.
For Windows Server 2008:
■ Install IPMI tool as described in “To Install Supplemental Software Using the
Installation Wizard” on page 54.
■ No configuration is required. IPMITool is ready for use.
▼ To Install Microsoft’s IPMI System Management Driver
(Windows Server 2003 R2 and R2 SP2)
Do the following before attempting to use IPMItool through the Windows operating
system:
1. Install the Microsoft IPMI System Management driver:
a. In Control Panel, open Add/Remove Programs.
The Add/Remove Programs dialog is displayed.
b. Click Add/Remove Windows Components.
The Windows Components Wizard dialog is displayed.
c. Highlight Management and Monitoring Tools component, and then click
Details.
The Management and Monitoring Tools page is displayed.
d. Do one of the following:
■ If the Select the Hardware Management subcomponent check box is
already selected, skip to Step 2.
■ If the Select the Hardware Management subcomponent check box is not
selected, select it. The “3rd Party Drivers” warning dialog appears.
e. Read the warning and then click OK.
The Management and Monitoring Tools page is displayed.
To Next Page
Loading...
