Chapter 8 Update the Critical Server-Specific Drivers 63
f. Click OK.
The Windows Components Wizard dialog is displayed.
g. Click Next.
The Hardware Management component is installed.
2. Instantiate the IPMI System Management driver.
3. On the Taskbar, click Start, and then click Run.
The Run dialog box is displayed.
4. In the Open list, type:
rundll32 ipmisetp.dll,AddTheDevice
5. Click OK.
The IPMI System Management driver is instantiated.
6. To ensure that the IPMI System Management driver is installed, repeat steps 1a
through 1c, above.
For information about using the IPMItool, refer to your Sun Integrated Lights Out
Manager 2.0 User’s Guide (820-1188). For more information on standard IPMItool
commands, please see:
http://ipmitool.sourceforge.net/manpage.html
To Next Page
Loading...
