Page 50
880 SERIES
= Rewind: Tap to move back through tracks.
= Pause/Play: Tap to pause and play tracks.
= Artist Track: Will display the artist and track information,
if it is available. If the information is not available this part
will be blank. If the information provided is too long, the
maximum number of characters will be display follow by
dots (“...”).
= Audio Settings: Tap to access the audio submenu, page 51.
= Volume: Displays the current volume level from 0 to 30.
= Back Button: Tap to go back to the Home Menu.
= Invert Button: Tap to invert the display image.
11.4 Connecting the BLUEWAVE® System with your Bluetooth®
device
To bridge a connection between the BLUEWAVE 2.0 Wireless Audio
System and your Bluetooth® device, follow the steps below.
Note: The BT icon cannot be selected manually unless a Bluetooth
connection is established with your device. If you experience a connec-
tion problem with your Bluetooth device, make sure that the Bluetooth
antenna is secure and located at the highest point within the equipment
bay.
1. Tap the music icon on the control panel screen then tap the power
button.
2. From your Bluetooth device, make sure that the Bluetooth setting is
ON.
3. Follow the pairing instructions for your Bluetooth device and connect
to the “BLUEWAVE” device that appears on your screen.
4. Once the connection is established, the Bluetooth icon ( ) on the
screen will be display conrming the connection.
5. If asked for a password, enter the password “0000” and then tap
“Pair” on your device to connect.
6. If the pairing process is successful, your Bluetooth device will show
“Connected” right next to “BLUEWAVE.”
Track Name
To Next Page
Loading...
