34
Sunstone Welders User Manual: CDDP-A
Warnings and Alarms (Pop ups)
User can dene the number of comparator failures in a row in the Alarms
page. Once this has been met this pop up will appear.
If the electrode is stuck after a weld has occurred, this pop up will appear.
This Pop up will automatically disappear if the electrode becomes unstuck.
If the emergency stop is active, this pop up will appear. Reasons for the
pop up can include: internal communication error, voltage error on terminals,
voltage error on capacitors, internal temperature over heating, or capacitors
not charging.
If a le becomes corrupt this pop up will appear.
If the server for the update is not available this pop up will occur.
If a le doesn’t transfer correctly this pop up will occur.
To Next Page
Loading...
