Release : 1.1f 123 / 985
Super Micro Intelligent Switch Command Line Interface User Guide
3.83 show port-monitoring
This command displays port-monitoring information.
show port-monitoring
Mode
Privileged EXEC Mode
Example
SMIS# show port-monitoring
Port Monitoring is enabled
Monitor Port : Gi0/2
Port Ingress-Monitoring Egress-Monitoring
Gi0/1 Disabled Disabled
Gi0/2 Enabled Enabled
Gi0/3 Disabled Disabled
Gi0/4 Disabled Disabled
Gi0/5 Disabled Disabled
Gi0/6 Disabled Disabled
Related Command
monitor session - Enables port-mirroring in the switch
To Next Page
Loading...
