Release : 1.1f 642 / 985
Super Micro Intelligent Switch Command Line Interface User Guide
25.20 debug ip rip
This command sets the debug level for RIP module and the no form of the command resets the
debug level for RIP module.
debug ip rip { all | init | data | control | dump | os | mgmt | failure
| buffer }
no debug ip rip { all | init | data | control | dump | os | mgmt |
failure | buffer }
Syntax Description
all - All resources
init - Initialization and Shutdown messages
data - Data path messages
control - Control Plane messages
dump - Packet Dump messages
os - OS Resource Messages
mgmt - Management messages
failure - All failure messages (All failures including Packet Validation)
buffer - Buffer messages
Mode
Privileged EXEC Mode
Defaults
init
Example
SMIS# debug ip rip all
Related Command
show ip rip – Displays IP RIP protocol database or statistics
To Next Page
Loading...
