Release : 1.1f 765 / 985
Super Micro Intelligent Switch Command Line Interface User Guide
27.53 show ip bgp rfl info
This command displays information about RFL feature.
show ip bgp rfl info
Mode
Privileged EXEC Mode
Example
SMIS# show ip bgp rfl info
Cluster id is 10.0.0.1
Desired Support of the route reflector - Client Support
BGP Peer Extension Table
Peer Address Client/Non-Client
---- ------- -----------------
10.0.0.2 Non-client
10.0.0.3 Non-client
10.0.0.4 Client
10.0.0.6 Non-client
10.0.0.7 Non-client
10.0.0.8 Non-client
BGP Speaker Local AS number must be configured.
Related Commands
bgp nonbgproute-advt – Controls the advertisement of Non-BGP routes either to the
external
peer (1) or both to internal & external peer (2)
bgp client-to-client reflection – Configures the Route Reflector to support route
reflection to Client Peers
neighbor - route-reflector-client – Configures the Peer as Client of the Route
Reflector
bgp cluster-id – Configures the Cluster ID for Route Reflector
To Next Page
Loading...
