Release : 1.1f 86 / 985
Super Micro Intelligent Switch Command Line Interface User Guide
3.48 copy startup-config
This command takes a backup of the initial configuration in flash or at a remote location.
copy startup-config {flash: filename | tftp://ip-address/filename
usb:filename }
Syntax Description
flash: filename - Flash or remote site
tftp - Copies a file to a TFTP server
ip-address - the IP address or host name of the server to receive the file
filename - the name assigned to the file on the server
usb:filename – File name to be copied in to external usb memory
Mode
Privileged EXEC Mode
Example
SMIS# copy startup-config flash:clcliser
A startup-config contains configuration information that the ISS uses when it reboots.
TFTP is a simplified version of FTP that allows files to be transferred from one computer to
another over a network, usually without the use of client authentication (for example, username
and password)
To Next Page
Loading...
