Release : 1.1f 718 / 985
Super Micro Intelligent Switch Command Line Interface User Guide
27.13 neighbor - shutdown
This command disables the Peer session and the no form of the command enables the Peer
session.
neighbor <ip-address> shutdown
no neighbor <ip-address> shutdown
Syntax Description
ip-address - Peer ip address
shutdown - Terminates the peer session
Mode
Router Configuration Mode
Example
SMIS(config-router)# neighbor 23.45.0.1 shutdown
BGP Speaker Local AS number must be configured.
Peer must be created and peer AS must be configured.
Related Commands
router bgp – Sets the AS number of the BGP Speaker
show ip bgp – Displays the BGP related information
To Next Page
Loading...
