Release : 1.1f 792 / 985
Super Micro Intelligent Switch Command Line Interface User Guide
28.17 ping ipv6
This command sends IPv6 echo messages.
ping ipv6 <prefix> [data <hex_str>] [repeat <count>] [size <value>]
[anycast] [source {vlan <id> | <source_prefix>}] [timeout <value (1-
100)>]
Syntax Description
prefix - IPv6 Destination Prefix
data - Data to be sent in ping message
repeat - Number of ping messages
size - Size of the ping message
anycast - Type of Prefix
source - Source Interface of the ping message can be vlan or source_prefix
Timeout - Duration to wait for the reply
Mode
Privileged EXEC Mode
Defaults
data - a5a5
repeat <count> - 5
size - 100 bytes
timeout - 5 seconds
Example
SMIS# ping ipv6 3333::1111 data a6b6
To Next Page
Loading...
