Release : 1.1f 966 / 985
Super Micro Intelligent Switch Command Line Interface User Guide
36.5 lldp reinitialization-delay
This command configures time delay used to initialize LLDP on any interface.
The no form of this command resets the time delay to its default value 2 seconds.
lldp reinitialization-delay <seconds(1-10)>
no lldp reinitialization-delay
Syntax Description
reinitialization-delay – any number between 1 to 10
Mode
Global Configuration Mode
Defaults
2 seconds
Example
SMIS(config)# lldp reinitialization-delay 8
Related Commands
show lldp – Displays the LLDP feature information.
To Next Page
Loading...
