Release : 1.1f 829 / 985
Super Micro Intelligent Switch Command Line Interface User Guide
31.2 router-id
This command sets a fixed router ID.
router-id <IPv4-Address>
Syntax Description
IPv4-Address - A 32-bit integer that uniquely identifies the router in the autonomous system.
Mode
Router Configuration Mode
Defaults
IPv4-Address - 0.0.0.0
Example
SMIS(config-router)# router-id 11.0.0.1
Related Command
show ipv6 ospf - General Information – Displays general information about the
OSPFv3 routing process
To Next Page
Loading...
