Release : 1.1f 292 / 985
Super Micro Intelligent Switch Command Line Interface User Guide
Pseudo port-channel = Po1
LACP port-priority = 128
LACP Wait-time = 2 secs
LACP Activity : Active
LACP Timeout : Long
Aggregation State : Aggregation, Sync, Collecting, Distributing,
LACP Port Admin Oper Port Port
Port State Priority Key Key Number State
------------------------------------------------
Gi0/1 Bundle 128 1 1 0x1 0xbc
Gi0/2 Bundle 128 1 1 0x2 0xbc
SMIS# show etherchannel 1 port-channel
Port-channel is enabled
Max Port Channels is 24 with maximum 8 active ports per port
channel
Channel Group Listing
---------------------
Group : 1
----------
Port-channels in the group:
---------------------------
Port-channel : Po1
-------------------
Number of Ports = 2
HotStandBy port = null
Port state = Port-channel Ag-Inuse
Protocol = LACP
MAC selection = Dynamic
SMIS# show etherchannel 1 summary
Flags:
D - down P - in port-channel
I - stand-alone S - suspended
H - Hot-standby (LACP only)
Port-channel is enabled
Port-channel System Identifier is 00:01:02:03:04:05
To Next Page
Loading...
