Release : 1.1f 323 / 985
Super Micro Intelligent Switch Command Line Interface User Guide
Group specific query interval is 2 seconds
Reports are forwarded on router ports
Group specific query retry count is 2
Related Commands
ip igmp snooping - Enables IGMP snooping in the switch/a specific VLAN
ip igmp snooping proxy-reporting - Enables proxy reporting in the IGMP snooping
switch
snooping multicast-forwarding-mode - Specifies the forwarding mode (IP based or
MAC based) that will be effective on switch restart
ip igmp snooping port-purge-interval - Sets the IGMP snooping port purge time
interval after which the port gets deleted if no IGMP reports are received
ip igmp snooping report-suppression interval - Sets the IGMP report-suppression
interval
ip igmp snooping retry-count - Sets the maximum number of group specific queries
sent on a port on reception of a IGMPV2 leave message
ip igmp snooping version – Specifies the IGMP snooping operating mode
of the switch
ip igmp snooping report-forward - Specifies if IGMP reports must be forwarded on all
ports or router ports of a VLAN
To Next Page
Loading...
