Release : 1.1f 384 / 985
Super Micro Intelligent Switch Command Line Interface User Guide
Mac Based Support : Disabled
Port-and-Protocol Based Support : Enabled
Default Priority : 0
-------------------------------------------------------
If executed without the optional parameter this command displays the port information of
all the available ports.
Related Commands
set port gvrp - Enables or disables GVRP on the interface
set port gmrp - Enables or disables GMRP on the interface
switchport pvid - Configures the PVID (VLAN ID) that would be assigned to
untagged/prioritytagged frames/VLAN tagged frames
switchport acceptable-frame-type - Configures the acceptable frame type for the port
switchport ingress-filter - Enables ingress filtering on the port
port mac-vlan - Enables MAC-based VLAN on the port
port protocol-vlan - Enables port protocol based VLANs
vlan restricted - Enables/disables restricted VLAN registration on the port
To Next Page
Loading...
