Release : 1.1f 704 / 985
Super Micro Intelligent Switch Command Line Interface User Guide
(standard/extended) to peer
bgp nonbgproute-advt – Controls the advertisement of Non-BGP routes
no ip bgp overlap-policy – Resets the Overlap route policy to default
redistribute – Configures the protocol from which the routes have to be redistributed into
BGP
bgp always-compare-med – Enables the comparison of med for routes received from
different autonomous system
default-metric – Configures the Default IGP Metric value
bgp med – Configures an entry in MED Table
bgp local-preference – Configures an entry in Local Preference Table
bgp update-filter – Configures an entry in Update Filter Table
aggregate-address index – Configures an entry in Aggregate Table
bgp cluster-id – Configures the Cluster ID for Route Reflector
bgp client-to-client reflection – Configures the Route Reflector to support route
reflection to Client Peers
neighbor - route-reflector-client – Configures the Peer as Client of the Route
Reflector
bgp comm-route – Configures an entry in additive or delete community table
bgp comm-peer – Enables/disables advertisement of community attributes to peer
bgp comm-filter – Allows/filters the community attribute while receiving or advertising
bgp comm-policy – Configures the community attribute advertisement policy for specific
destination
bgp ecomm-route – Configures an entry in additive or delete ext community table
bgp ecomm-peer – Enables/disables advertisement of ext community attributes to peer
bgp ecomm-filter – Allows/filters the ext community attribute while receiving or advertising
bgp ecomm-policy – Configures the extended community attribute advertisement policy for
specific destination
bgp confederation identifier – Specifies the BGP confederation identifier
bgp confederation peers – Configures the ASs that belongs to the confederation
bgp bestpath med confed – Enables MED comparison among paths learnt from confed
peers
neighbor - password – Configures the password for TCP-MD5 authentication with peer
debug ip bgp – Configures the Trace levels
show bgp-version – Displays the BGP Version information
show ip bgp – Displays the BGP related information
To Next Page
Loading...
