Release : 1.1f 871 / 985
Super Micro Intelligent Switch Command Line Interface User Guide
ism - Interface State Machine Trace
nsm - Neighbor State Machine Trace
rt_calc - Routing Table Calculation Trace
interface - Interface Trace
config - Configuration Trace
Mode
Privileged EXEC Mode
Defaults
Debugging is disabled by default.
Example
SMIS# debug ipv6 ospf pkt high hp level fn_entry module ppp
Related Command
show ipv6 ospf - General Information – Displays general information about the
OSPFv3 routing process
To Next Page
Loading...
