SureShot IntelliShot - Page 9

9
9. Whileholdingthevalvedoorclosedwithone
hand,tightentheknobscrewinaclockwise
motionuntilthedoorissnug. Donotover
tightenthescrew.
10. Closetherefrigeratedproductcompa rtment
door.
11. Squeezetheproductdeliverytubejustbelowthe
valvewithallfingertips.
12. PCDispensers:Whilesqueezingthetube,press
the“small”productquantitybuttononthefront
doorbuttonpanelonceonly.Thiswillcausethe
valvetooperateonceandrelievepressureinthe
tube.
SSDispensers: Whilesqueezingthetube,hold
theleverdowntorelievepressureinthetube.
13. Usesharpscissorsorasharpknifetocarefully
cuttheproductdeliverytubeata45°angleata
maximumlengthof5/8”fromthebottomofthe
valveblock. Discardthecutportionofthetube.
CutTube
Thedispenserisreadyforuse.