4E-68 ABS:
2 1) Inspect both of the wheel speed sensor rotors for
damage and check that no foreign objects are caught in
the rotor openings.
Are the rotors OK?
Go to Step 3. Clean or replace the
rotor.
3 1) Check that the front and rear wheel speed sensors are
mounted securely.
Are the sensors mounted securely?
Go to Step 4. Tighten the mounting
bolts or replace the
bracket if necessary.
4 1) Delete DTCs and repeat the code output procedure.
Refer to “DTC (Diagnostic Trouble Code) Deleting
(AN400A/ZAK9)” (Page 4E-25) and “DTC (Diagnostic
Trouble Code) Output (AN400A/ZAK9)” (Page 4E-22).
Is the DTC “55” (C1655) output again?
Replace the ABS
control unit/HU.
Intermittent trouble.
Step Action Yes No
I905H1450049-01
I905H1450050-01
I905H1450005-01
To Next Page
Loading...
