Suzuki AN400 - Specifications; Tightening Torque Specifications; Special Tools and Equipment; Recommended Service Material

ABS: 4E-77
Specifications
Tightening Torque Specifications
B905H14507001
Reference:
For the tightening torque of fastener not specified in this section, refer to “Tightening Torque List” in Section 0C in
related manual.
Special Tools and Equipment
Recommended Service Material
B905H14508001
NOTE
Required service material is also described in the following.
“Rear Wheel Speed Sensor Routing Diagram (AN400A/ZAK9)” (Page 4E-10)
Special Tool
B905H14508002
Fastening part
Tightening torque
Note
N⋅m kgf-m lbf-ft
Front wheel speed sensor rotor bolt 6 0.6 4.5 )(Page 4E-73)
Rear wheel speed sensor rotor bolt 6 0.6 4.5 )(Page 4E-74)
Brake pipe flare nut 16 1.6 11.5 )(Page 4E-76)
09900–20803 09900–20806
Thickness gauge Thickness gauge
)(Page 4E-15) /
)(Page 4E-32) /
)(Page 4E-34) /
)(Page 4E-36) /
)(Page 4E-38) /
)(Page 4E-41) /
)(Page 4E-44) /
)(Page 4E-54) /
)(Page 4E-67) /
)(Page 4E-71) /
)(Page 4E-72) /
)(Page 4E-73) /
)(Page 4E-74)
)(Page 4E-15) /
)(Page 4E-32) /
)(Page 4E-34) /
)(Page 4E-36) /
)(Page 4E-38) /
)(Page 4E-41) /
)(Page 4E-44) /
)(Page 4E-54) /
)(Page 4E-67) /
)(Page 4E-71) /
)(Page 4E-72) /
)(Page 4E-73) /
)(Page 4E-74)