ABS: 4E-69
DTC “61” (C1661): ABS Solenoid Malfunction (AN400A/ZAK9)
B905H14504018
Troubleshooting
NOTE
After repairing the trouble, clear the DTC using SDS tool. Refer to “DTC (Diagnostic Trouble Code)
Deleting (AN400A/ZAK9)” (Page 4E-25).
Possible Cause
Faulty solenoid valve or relay
Step Action Yes No
1 1) Turn the ignition switch OFF.
2) Remove the upper meter panel. Refer to “Upper Meter
Panel Removal and Installation” in Section 9D in related
manual.
3) Inspect the ABS valve fuse (1).
CAUTION
!
If a fuse is blown, find the cause of the problem
and correct it before replacing the fuse.
ABS valve fuse
15 A
Is the ABS valve fuse OK?
Go to Step 2. Replace the ABS valve
fuse.
1
I905H1450051-01