Service Data: 0C-1
General Info rmation
Service Data
Specifications
Service Data (AN400K9)
B905H10307004
NOTE
Any differences between the AN400K8 (’08-model) and AN400K9 (’09-model) is service data are
indicated an asterisk mark (*).
Clutch
Unit: mm (in)
Transmission
Unit: mm (in) Except ratio
Throttle Body
Item Specification Limit
Clutch wheel I.D. 160 – 160.2 (6.30 – 6.31) 160.5 (6.32)
Clutch shoe thickness 5.0 (2.0) 2.0 (0.08)
Engage r/min
* 2 600 – 3 200 r/min —
Lock-up r/min 4 000 – 5 000 r/min —
Item Specification Note
Primary reduction ratio 1.000 —
Reduction ratio 2.200 – 0.839
Secondary reduction ratio 2.214 —
Final reduction ratio 2.666 —
Drive V-belt width 25.1 (0.99) 24.1 (0.95)
Movable driven face spring free
length
* 145.0 (5.7) * 137.8 (5.43)
Movable drive face roller O.D. 26.00 – 26.16 (1.024 – 1.030) —
Drive/driven face ware — 0.4 (0.02)
Item
Specification
E-02, 03, 19, 24, 28, 51, 54 E-33
I.D. No.
* 05H2 * 05H3
Bore size 38 mm (1.5 in) ←
Fast idle r/min 1 500 – 2 000 r/min ←
Idle r/min 1 450 ± 100 r/min ←
Throttle cable play 2.0 – 4.0 mm (0.08 – 0.16 in) ←
To Next Page
Loading...
