Suzuki AN400 - Active Control Inspection (AN400 A;ZAK9)

4E-28 ABS:
DATA sampled from ABS HU system
Active Control Inspection (AN400A/ZAK9)
B905H14504024
1) Remove the upper meter panel. Refer to “Upper
Meter Panel Removal and Installation” in Section 9D
in related manual.
2) Set up the SDS tool. (Refer to the SDS operation
manual for further details.)
Special tool
: 09904–41010 (SUZUKI Diagnostic system
set)
: 99565–01010–020 (CD-ROM Ver.20)
3) Click “ABS” (1).
Check the front wheel speed.
Check the front wheel speed.
XX
XX
km/h
km/h
Check the front wheel speed.
XX km/h
Check the rear wheel speed.
XX km/h
Check the battery voltage.
XX V
Check the brake switch ON and OFF.
I718H1450048-03
1
I905H1450084-02