4E-16 ABS:
ABS Indicator Light Inspection (AN400A/ZAK9)
B905H14504020
Wiring Diagram
Refer to “ABS Unit Diagram (AN400A/ZAK9)” (Page 4E-8).
Troubleshooting
Step Action Yes No
1 1) Check if the ABS indicator light lights up when turning
the ignition switch ON.
Does the ABS indicator light up?
Go to Step 2. Go to Step 3.
2 (The ABS indicator light lights up)
1) Ride the motorcycle at more than 10 km/h (6.2 mile/h).
Does the ABS indicator light go off?
Normal (No DTC exists) • DTC output (Refer to
“DTC (Diagnostic
Trouble Code) Output
(AN400A/ZAK9)”
(Page 4E-22).)
• If DTC can not be
output (the ABS
indicator light does
not flash), go to Step
7.
I905H1450016-01
I905H1450017-03
To Next Page
Loading...
