9C-1 Combination Meter / Fuel Meter / Horn:
Body and Acc essories
Combination Meter / Fuel Meter / Horn
Repair Instructions
Combination Meter (ABS Indicator Light)
Inspection (AN400A/ZAK9)
B905H19306014
Check if the ABS indicator lights up when turning the
ignition switch ON.
If the ABS indicator does not light up, replace the
combination meter assembly with a new one after
checking its wire harness/coupler.
Refer to “ABS Indicator Light Inspection (AN400A/
ZAK9)” in Section 4E (Page 4E-16).
Specifications
Service Data (AN400K9)
B905H19307002
NOTE
The service data is the same as the K8-model.
Service Data (AN400A/ZAK9)
B905H19307003
Refer to “Service Data (AN400A/ZAK9)” (Page 9C-1).
I905H1450074-01
To Next Page
Loading...
