Service Data: 0C-3
Brake + Wheel
Unit: mm (in)
Tightening Torque List (AN400AK9)
B905H10307006
NOTE
Please refer to the AN400K8 service manual for other tightening torque which are not given in this
manual.
Engine
Chassis
Item Standard Limit
Brake disc thickness
Front 4.5 ± 0.2 (0.18 ± 0.008) 4.0 (0.16)
Rear 5.0 ± 0.2 (0.20 ± 0.008) 4.5 (0.18)
Brake disc runout — 0.30 (0.01)
Master cylinder bore
Front
* 14.000 – 14.043 (0.551 – 0.553) —
Rear 12.700 – 12.743 (0.500 – 0.502) —
Master cylinder piston diameter
Front
* 13.957 – 13.984 (0.549 – 0.551) —
Rear 12.657 – 12.684 (0.498 – 0.499) —
Brake caliper cylinder bore
Front 25.400 – 25.450 (1.000 – 1.002) —
Rear 27.00 – 27.05 (1.063 – 1.065) —
Brake caliper piston diameter
Front 25.318 – 25.368 (0.997 – 0.999) —
Rear 26.918 – 26.968 (1.060 – 1.062) —
Brake fluid type DOT 4 —
Wheel rim runout
Axial — 2.0 (0.08)
Radial — 2.0 (0.08)
Wheel axle runout
Front — 0.25 (0.01)
Rear — 0.25 (0.01)
Wheel rim size
Front 14 M/C x MT3.00 —
Rear 13 M/C x MT4.00 —
Item N⋅m kgf-m lbf-ft
Main gallery plug M10 18 1.8 13.0
Item N⋅m kgf-m lbf-ft
Brake pipe flare nut 16 1.6 11.5
Wheel speed sensor rotor bolt (Front & Rear) 6 0.6 4.5
To Next Page
Loading...
