Fuel System: 1G-2
Fuel Pump Disassembly and Assembly (AN400/
A/ZAK9)
B905H11706018
Disassembly
1) Remove the fuel pump assembly.
Refer to “Fuel Pump Assembly Removal and
Installation” in related manual.
2) Remove the dust cover (1).
3) For the other procedure, refer to “Fuel Pump
Disassembly and Assembly” in related manual.
Assembly
Assemble the fuel pump assembly in the reverse order
of the disassembly.
Refer to “Fuel Pump Disassembly and Assembly” in
related manual.
Specifications
Tightening Torque Specifications
B905H11707002
NOTE
The specified tightening torque is described in the following.
“Fuel Pump Components (AN400/A/ZAK9)” (Page 1G-1)
Reference:
For the tightening torque of fastener not specified in this section, refer to “Tightening Torque List” in Section 0C in
related manual.
Special Tools and Equipment
Recommended Service Material
B905H11708003
NOTE
Required service material is also described in the following.
“Fuel Pump Components (AN400/A/ZAK9)” (Page 1G-1)
1
1
I905H1170002-01
To Next Page
Loading...
