00-1 Precautions:
Precauti ons
Precautions
Precautions
Precautions for ABS (AN400A/ZAK9)
B905H10000004
ABS Wiring
• The ABS parts are connected to various lead wires.
The coupler and lead wire connections, as well as the
lead wire and wire harness routings must be done
correctly. Make sure that the proper clamps are used
and positioned correctly.
NOTE
If all of the connections are not properly
connected, the ABS may not operate
correctly. For connector and coupler
precautions. Refer to “Precautions for
Electrical Circuit Service” in related manual.
ABS Control Unit/HU
• Never allow dust or water to contact the ABS control
unit/HU.
• Never subject the ABS control unit/HU to strong
impacts or allow them to be dropped.
• The ABS control unit/HU cannot be disassembled.
Replace the whole unit with a new one.
I649G1000004-02
I649G1000003-02
I649G1000005-02
To Next Page
Loading...
