4E-20 ABS:
9 1) Connect the combination meter coupler.
2) Turn the ignition switch ON with the ABS control unit
coupler disconnected, measure the voltage between
“21” (Br) and “24” (B/W) at the coupler.
Special tool
(A): 09900–25008 (Multi circuit tester set)
Tester knob indication
Voltage ( )
Normal value (“21” – “24”)
8.0 V and more
ABS control unit coupler (Harness side)
Is the voltage between “21” and “24” normal?
Go to Step 10. Inspect the wire
harness. (Faulty
indicator light wire)
Step Action Yes No
24 25
(ޓ)
18
10
12 13
16
2
3
4
21
(ޓ)
89
(A)
I718H1450037-02
To Next Page
Loading...
