ABS: 4E-35
3 1) Check that the rear wheel speed sensor is mounted
securely.
Is the sensor mounted securely?
Go to Step 4. Tighten the mounting
bolts or replace the
bracket if necessary.
4 1) Inspect the rear tire and wheel. Refer to “Tire Inspection”
in Section 0B in related manual and “Rear Wheel
Related Parts Inspection” in Section 2D in related
manual.
Tire type and size
BRIDGESTONE HOOP B02 G, 150/70-13 M/C 64S
Cold inflation tire pressure (Solo riding)
200 kPa (2.00 kgf/cm
2
, 29 psi)
Cold inflation tire pressure (Dual riding)
250 kPa (2.50 kgf/cm
2
, 36 psi)
Wheel runout
Service limit (axial and radial): 2.0 mm (0.08 in)
Are the rear tire type, tire pressure and wheel runout OK?
Replace the ABS
control unit/HU.
Adjust or replace the
rear tire and wheel.
Step Action Yes No
I905H1450035-01
I905H1450036-01
To Next Page
Loading...
