27
NOTICE
If you operate the boat with the motor
trimmed beyond the maximum trim posi-
tion, the water intake holes may be above
the water line, causing severe engine
damage due to overheating.
Never operate the boat with the motor
trimmed beyond the maximum trim posi-
tion.
CONTROL HANDLE ADJUSTMENT
The control handle friction and control handle
detent force can be adjusted to suit operator’s
preference. The control handle friction adjust-
ment will change the overall effort to move the
control handle. This will help prevent undesired
movement of the control handle in rough water
conditions. Consult your authorized Suzuki
marine dealer to adjust the control handle fric-
tion and detent force.
IDLE SPEED ADJUSTMENT
The idle speed has been factory adjusted
between 550 – 650 r/min. in neutral.
NOTE:
If idle speed cannot be set within the specified
range, contact your authorized Suzuki Marine
Dealer.
Type Adjustable item
A Friction and detent force
BFriction
Type A
To Next Page
Loading...
