75
OPERATING THE TROLL MODE
MULTI-FUNCTION GAUGE
Switching to TROLL Mode
Press and hold the [MENU] button during cruis-
ing operation at Trolling Speed (minimum
speed), and this will switch the operation to
TROLL Mode.
For the Trolling Speed, the desired engine
speed can be set and maintained within the
range from 600 r/min to 1200 r/min using the
[ ] or [ ] button.
NOTE:
Please contact your authorized Suzuki Marine
Dealer for more information.
Setting the Troll Mode
1. Shift into forward or reverse gear and make
sure that the throttle is fully closed (in-gear
idle speed).
2. When the [MENU] button is pressed and
held in the Multi-Function Gauge screen, the
confirmation message “Start Troll Mode?” is
displayed.
3. When “YES” is selected:
When “YES” is selected and the [SET] but-
ton is pressed, one beep sounds to show
that it is now in TROLL Mode. At the same
time, the screen will change and display the
specific TROLL Mode screen, and
is displayed on the gauge screen. When the
gauge screen displays “Engine Speed
Screen” or “All Items Screen”, the engine
speed screen automatically changes from
an analog to a digital display.
• This icon appears on the
screen of the Multi-Function
Gauge that was operated to
get into the troll mode, and
shows operatable Multi-Func-
tion Gauge of the troll mode.
• This icon appears on the
screen of the Multi-Function
Gauge(s) that did not be oper-
ated to get into the troll mode.
This icon appears on the
screen of the Multi-Function
Gauge(s) that cannot operate
the troll mode.
To Next Page
Loading...
