50
CANCELLATION
1. If equipped with Keyless Start System:
Turn the Keyless Start System to ON state
by turn the main switch to the “ ” position
and then release it. The main switch auto-
matically returns to the “ ” position.
If not equipped with Keyless Start System:
Turn the main switch to the “ON” position.
2. Pull out the emergency stop switch lock
plate 1.
3. Push the start & stop switch 2 three times in
10 seconds. A short beep will be heard if the
cancellation is successfully finished.
4. If equipped with Keyless Start System:
Turn the main switch to the “ ” position and
then release it to the “ ” position to turn the
Keyless Start System to OFF state.
NOTE:
The Keyless Start System can also be turned to
OFF state by pressing the lock button on the
key-fob.
To Next Page
Loading...
