35
Data Output
NOTE:
For details the proper handling of the multi-
function gauge, refer to “OPERATION
INSTRUCTION MANUAL” packed in the gauge.
Press the [ ] or [ ] button to select “Data
Output” and then press the [SET] button to dis-
play the Data Output selection menu.
Create Data:
The “Create Data” items (engine oil change fre-
quency, total operation hours, etc.) can be
checked.
Log:
The “Create Data” items (engine oil change fre-
quency, total operation hours, etc.) obtained
and saved before, can be checked.
3. Display
While [Display] is selected, press the [SET] but-
ton to display the selection menu for Digital indi-
cation, Analog indication, and indication OFF.
Select the display item using the [ ] or [ ]
button. Then, press the [SET] button to select
“Analog1”, “Analog2”, “Digital” or “OFF”.
As the “Fuel” screen displays only in digital
mode, the available selection is either “ON” or
“OFF.”
Log
Create Data
Data Output
When the indication is set to “OFF”, the display
screen for that item is skipped and the next
screen is displayed. (Refer to the SCREEN
SELECTION section)
NOTE:
It is not possible to set all the display items to
OFF (hidden). Please set at least one (1) dis-
play item to be displayed.
4. Device list
The serial number 1 of the connected multi-
function gauge, the name 2 of the con-
nected device(s) and its serial number 3 are
displayed.
Press the [ ] or [ ] button to select
“Device List” and press the [SET] button.
POINT-1 GPS
6271
Serial No. 00000CB8
Device List
To Next Page
Loading...
