67
3. Make sure lock plate 3 is in position.
4. Turn the emergency key to “ ” position,
and then release it to the “ ” position. The
buzzer emits one (1) long sound and five (5)
short sounds.
5. Pull out the emergency stop switch lock
plate.
6. Turn the emergency key to the “ ” position
and hold it until the buzzer sounds.
Turn the emergency key back to the “ ”
position. The system turns to stand-by state
for passcode input.
7. Take the following steps to enter the pass-
code.
(1)Turn the main switch to the “ ” position and
then release it. The main switch automati-
cally returns to the “ ” position.
To Next Page
Loading...
