Suzuki DR-Z125L - Page 131

5-24 CHASSIS
• Install the spring as shown.
• Tighten the front fork cap bolt to the specified torque.
& Front fork cap bolt: 23 N·m (2.3 kgf-m, 16.5 lb-ft)
• Install the boot.
• Tighten the upper clamp bolt
1 to the specified torque.
• Tighten the lower clamp bolt
2 to the specified torque.
& Front fork upper clamp bolt: 23 N·m (2.3 kgf-m, 16.5 lb-ft)
Front fork lower clamp bolt: 33 N·m (3.3 kgf-m, 24.0 lb-ft)
bottom