Suzuki DR-Z125L - Page 136

CHASSIS 5-29
• Set the throttle grip case to match its mating face to the
punched mark
1 on the handlebars.
• Apply SUZUKI SUPER GREASE “A” to the end of throttle
cables.
% 99000-25030: SUZUKI SUPER GREASE “A” (USA)
99000-25010: SUZUKI SUPER GREASE “A” (Others)
• Set the clutch lever holder to match its mating face to the
punched mark
2 on the handlebars.
• Install the engine stop button
3.
• Set the front brake lever to match its mating face to the
punched mark
4 on the handlebars. (DR-Z125)
• Set the front brake master cylinder to match its mating face to
the punched mark
5 on the handlebars. (DR-Z125L)
• Install the front fender. (!5-2)
• Install the front wheel. (!5-7 or -9)
• Install the front number plate. (!5-2)