17
RIGHT
KNUCKLE COVER
Install the right side knuckle cover correctly.
A: Knuckle cover
B: 5 × 10 mm screw
C: Washer OD:16.0 mm ID:5.5 mm
D: Washer OD:16.0 mm ID:6.5 mm
E: 6 mm self-lock nut
LEFT
Install the left side knuckle cover correctly.
A: Knuckle cover
B: 6 mm crown nut
C:
Washer OD:20.0 mm ID:6.5 mm (Black)
D: Washer OD:16.5 mm ID:6.5 mm T:1.6 mm (Black)
E: Stepped washer OD:16.0 mm ID:6.5 mm T:5.5 mm (Black)
F: 6 mm self-lock nut
1.8 N·m (0.18 kgf-m, 1.35 lbf-ft)
A: Reflex reflector
B: Bracket
C: Hole
D: 5 mm lock washer
E: 5 mm crown nut (Reflex reflector nut)
FRONT REFLEX REFLECTOR
Install the reflex reflector to the bracket.
Reflex reflector nut:
To Next Page
Loading...
