18
REAR TURN SIGNAL LIGHT (LEFT)
Set the rear turn signal light at correct direction.
Fit the projection on the turn signal light to the hole of
turn signal light bracket.
Install the turn signal light with the nut.
A: Rear turn signal light
B: Projection
C: Bracket
D: Hole
E: Flange nut
LEFT
Install the clamp to the hole of the frame.
A: Clamp
B: Frame
C: Hole
Clamp the rear turn signal lead wire and tail/brake light
lead wire.
Fix the clamp by pushing the center pin.
A: Rear turn signal lead wire
B: Tail/brake light lead wire
C: Clamp
D: Frame
To Next Page
Loading...
