Swann AMI INSPECTOR pH - Connecting Sample Inlet and Outlet

AMI INSPECTOR pH
Product Description
A-96.250.761 / 161017 11
2.3. Technical Data
Power Supply Battery
Use original, supplied power adapter only.
Voltage:
Power consumption:
Charging Time:
Battery type:
85–265 VAC, 50/60 Hz
max. 20 VA
~ 6h
Li-Ion
During charging protect from heat impact and keep splash-proof
(not IP66).
Measuring
Range
pH:
Resolution:
1 to 12 pH
0.01 pH
Temperature
Input
for Pt1000 type sensor
Measuring range:
Resolution:
- 30 to +130 °C
0.1 °C
Sample
conditions
Flow Rate:
Temperature:
Inlet pressure:
5–10 l/h
up to 50 °C
0.2–2 bar
Temperature
monitoring
Alarm if the transmitter temperature is higher than + 65 °C or lower
than 0 °C.