38 A-96.250.761 / 161017
AMI INSPECTOR pH
Maintenance
6.5.5 Completion of the measurement
1 Stop the sample flow to the AMI pH-Redox by closing the ap-
propriate valve, e.g. back pressure regulator, sample prepara-
tion or flow regulating valve at flow cell again.
2 Close flow regulating valve of the AMI Inspector pH.
3 Disconnect the AMI Inspector pH by removing the tubes and
connect the sample outlet of the Monitor AMI pH-Redox to the
sample outlet funnel again.
4 Start sample flow again and regulate sample flow.
5 Shutdown AMI Inspector pH.
If the instrument will not be used for a longer period of time, see
Longer Stop of Operation, S. 41.
To Next Page
Loading...
