EN-38
PERIODIC MAINTENANCE AND
ADJUSTMENTS
Carry out proper maintenance according to the
table given in Appendix A in this manual, which
indicates the periodic maintenance intervals. The
intervals indicated in the maintenance table refer
to normal use. Nevertheless, it may be necessary
to reduce these intervals in relation to the climatic
conditions and individual use.
CAUTION
Before carrying out any maintenance opera-
tion, check that you have the necessary tools,
components and technical skills.
-Turn off the engine and park the motorcycle
on a flat and solid surface.
-Wait for the engine, the silencers and the
brake discs to cool down.
OIL LEVEL CHECK
Note*: Check the oil level when the engine has
just been turned off and is still hot.
WARNING
Be careful not to touch hot engine oil
-Position the motorcycle on a flat surface in ver-
tical position.
-Check the oil level through the inspection glass
(1).
-If the oil needs to be topped up, unscrew the
plug (2) and pour the oil through the hole (3) until
reaching the proper level.
To Next Page
Loading...
