SWM VAREZ - Abs Malfunction List

19- EN
ABS MALFUNCTION LIST
DTC
Malfunction
Possible Causes
Possible Impact
Recommended Measures
C1101
ECU Voltage supply: high voltage
Poor connect of battery terminal.
ABS alarms and not working.
Clean the terminal.
C1102
ECU Voltage supply: low voltage
Poor connect of battery terminal.
ABS alarms and not working.
Clean the terminal.
C1200
Wheel-speed sensor, front: signal cable is
short or open circuit; power supply cable is
open circuit
Poor connect of sensor cable.
ABS alarms and not working.
Check the cable connection.
C1201
Wheel-speed sensor, front: (signal failure)
out of range, lost, noise, Intermittent
Dirt on the sensor probe or tone
wheel.
ABS alarms and not working.
Clean the probe and tone wheel.
C1202
Wheel-speed sensor, front: general error
Too much gap between the sen-
sor probe with tone wheel.
ABS alarms and not working.
Check the distance between the
sensor probe with tone wheel.
C1206
Wheel-speed sensor, rear: signal cable is
short or open circuit; power supply cable is
open circuit
Poor connect of sensor cable.
ABS alarms and not working.
Check the cable connection.
C1207
Wheel-speed sensor, rear: (signal fail-
ure)out of range, lost, noise, Intermittent
Dirt on the sensor probe or tone
wheel.
ABS alarms and not working.
Clean the probe and tone wheel.
C1208
Wheel-speed sensor, rear: general error
Too much gap between the sen-
sor probe with tone wheel.
ABS alarms and not working.
Check the distance between the
sensor probe with tone wheel.