Deployment Solution 265
Chapter 30
Deployment Server Configuration Utility
The Altiris® Deployment Server® Configuration Utility provides general configuration
preferences for the Deployment Server. You can use the Deployment Server
Configuration Utility to:
z Set up an account for the Deployment Server. See Service Logon Account on
page 266.
z Stop, start, and restart the Deployment Server.
z View server activity and statistics.
z Map drives to file servers in your Deployment Server system (if you have images
stored in more than one place). See Drive Mappings Option on page 267.
z Set the communications protocol (multicast or TCP) and set the imaging multicast
threshold. See Transport Option on page 269.
Filter connections from the Deployment Server by IP addresses or network adapter
interface. See Connections Option on page 271.
z Set debug and log file options. See Debug Option on page 272.
From the main view of the Altiris Deployment Server Configuration Utility, you can view
the Deployment Server activity and statistics, start and stop the Deployment Server,
access Deployment Server configuration options, and more. The following are the fields
and tabs on the Altiris Deployment Server Configuration Utility page:
Log in to the Deployment Server you want to manage. Open the Deployment
Server Configuration Utility by clicking Start > All Programs > Altiris >
Deployment Server > Configuration. The Altiris Deployment Server
Configuration dialog appears.
Item Description
Server
activity and
statistics
Lists the number of Deployment Server sessions (client computers)
and Deployment Server Consoles currently running on the network.
Start Starts the Deployment Server on the local computer.
Stop Stops the Deployment Server on the local computer.
Restart Restarts the Deployment Server on the local computer.
To Next Page
Loading...