Symantec ALTIRIS DEPLOYMENT SOLUTION 6.9 SP4 - V1.0 - Command-Line Install Switches for Winpe

Deployment Solution 414
Command-Line Switches
Example: To install the Linux agent for x86 computers, run
C:\Program Files\Altiris\eXpress\Deployment
Server\Bootwiz\bootwiz.exe –install -os LINUX -x86
"e:\BDCgpl_6.8.8260.frm"
Example: To silently install the Linux agent for x86 computers, run
C:\Program Files\Altiris\eXpress\Deployment
Server\Bootwiz\bootwiz.exe –install -os LINUX -x86
"e:\BDCgpl_6.8.8260.frm" -quiet
Tip
You can do the same for x64 and ia64 computers.
Command-line Install Switches for WinPE
The command-line switches used for WinPE files are “express path where the
bootwiz.exe is present” -install -os WINPE -x86/x64/ia64” path where the .EXE file is
present. The following table lists the Command-line Install and Silent Install Switches for
WinPE and the functions they perform.
-install -os LINUX -ia64
“e:\BDCgpl_6.8.8260.frm”
Installs the Linux agent for ia64
computers.
-install -os LINUX -x86
“e:\BDCgpl_6.8.8260.frm” -quiet
Silently installs the Linux agent for x86
computers.
-install -os LINUX -x64
“e:\BDCgpl_6.8.8260.frm” -quiet
Silently installs the Linux agent for x64
computers.
-install -os LINUX -ia64
“e:\BSCgpl_6.8.8260.frm” -quiet
Silently installs the Linux agent for ia64
computers.
Switch Details
-install -os WINPE -x86
“e:\Altiris_DS_Preboot_WinPE2005_x86.
exe”
Installs the WinPE agent for x86
computers.
-install -os WINPE -x64
“e:\Altiris_DS_Preboot_WinPE2005_x64.
exe”
Installs the WinPE agent for x64
computers.
-install -os WINPE -ia64
“e:\Altiris_DS_Preboot_WinPE2005_ia64
.exe”
Intalls the WinPE agent for ia64
computers.
-install -os WINPE -x86
“e:\Altiris_DS_Preboot_WinPE2005_x86.
exe” -quiet
Silently installs the WinPE agent for x86
computers.
Switch Details