Deployment Solution 320
Altiris® ImageExplorer
Using ImageExplorer
With ImageExplorer running, from the program menu bar, select File > Open to open
the image file you want to view or modify.
Note
In Deployment Solution 5.6 or later, you cannot use ImageExplorer to modify image
files created using IBMaster. You need an ImageExplorer version from Deployment
Solution 5.5 or earlier.
See also: View Properties on page 320, Add New Files on page 322, and Extract a
Folder on page 324.
View Properties
After opening an image file with ImageExplorer, you can view basic information about
the image file and its elements by selecting the file or volume (partition) name and
clicking Properties. You can open the Properties page for an image file, volume, or file
by right-clicking and selecting Properties, clicking File > Properties, or pressing
Properties Provides general information about
the folder or file, such as size,
modification dates, and attributes.
Properties appear differently for
images, volumes, folders, or files.
See View Properties on page 320.
Option 1:
Alt+Enter
Option 2: Select
File >
Properties
Option 3: Right-
click an item and
select Properties
Replace
Files
(available for
files)
Provides a way to update a file in the
image with a file from another
source. Both files must have the
same name.
Option 1: Ctrl+L
Option 2: Select
Edit > Replace
Option 3: Right-
click a file and
select Replace
Files
Revert
(available for
files)
An undo feature for the Replace File
option. This reverts a previously
changed file to its original file.
Option 1: Ctrl+R
Option 2: Select
Edit > Revert
Option 3: Right-
click an item and
select Revert
Files
Split Image Splits an image file of one size to into
segments of another size. See
Convert an Image on page 322.
Option 1: Ctrl+S
Option 2: Select
File > Split
Image
Feature Description Button Access
To Next Page
Loading...