Symantec ALTIRIS DEPLOYMENT SOLUTION 6.9 SP4 - V1.0 - Wlogevent VB Script (Windows); XP Embedded; Disable Enhanced Write Filter; Enable Enhanced Write Filter

Deployment Solution 474
Network Ports
PXE MTFTP
The Altiris PXE MTFTP Server service is used to transfer file data between the PXE Server
and the PXE Booting client. This service supports both MTFTP and TFTP standard
interfaces.
To configure the 1758 and 1759 ports
1. Go to the datastore path.
Note: By default, the path is: C:\Program Files\Altiris\eXpress\Deployment
Server.
2. Open the PXE folder.
3. Open the pxe.INI file in a text editor.
4. In the [MTFTPD] section, set the MCAST_CLNT_PORT value to 1758 and the
MCAST_SRVR_PORT value to 1759.
5. Save the pxe.INI file.
6. Restart PXE services.
PXE Manager and PXECfg Service
The Altiris PXE Manager Service controls the data associated with the PXE components
that are included in the PXE package. The PXE Configuration Utility and PXE Servers use
Deployment
Server
Altiris eXpress
Server
402 TCP/UDP
(multicast)
Agents, PXE
Server,
DataManager,
PXEManager
Yes
Deployment
Console (Win32
Console)
5001 TCP AClient Yes
5002 TCP AClient Yes
Deployment
Agent on Linux
(ADLAgent)
Altiris Network
Management Client
for Linux
415 TCP Remote Client Yes
Deployment
Agent on
Windows
(AClient)
Altiris Client Service 402 UDP Deployment
Server
Yes
Altiris Client Service 401 UDP AClient (Wake-
on-LAN Proxy)
No
Component Service Port Protocol Where is this
port
connected?
Is this port
configurable?