Symantec ALTIRIS DEPLOYMENT SOLUTION 6.9 SP4 - V1.0 - Add Component Entries

Deployment Solution 411
Command-Line Switches
PXCreateDefaultPXEBootFiles=FALSE | TRUE
SQLAuthentication=FALSE | TRUE
SQLUsername=Administrator
SQLPassword=password
OR
SQLEncryptedPassword=zlq%r*x+y
DSConnectionMethod=multicast | tcpip
DSConnectionServerName=* | <server name>
DSConnectionDSIPAddress=172.16.2.123
DSConnectionDSPort=402
COLocation=local | remote
CORemoteComputerName=DESKPRO4
COUsername=Administrator
COPassword=password
OR
COEncryptedPassword=zlq%r*x+y
WCLocation=local | remote | none
WCPath= c:\Program Files\Altiris\express\Deployment Server
WCRemoteComputerName=DESKPRO5
WCUsername=Administrator
WCPassword=password
WCEncryptedPassword= zlq%r*x+y
WCConsoleManagerPort=8081
Add Component Entries
If the InstallType is set to addcomponent, the following entries will be expected in the
SILENT.INI file. If any of the entries are missing then the default values will be used.
Using default values is not recommended because it may cause the validator function to
abort the install because the default values will not work with the specified values. Any
entries other than the ones listed below will be ignored for adding new components.
AddDSConsole=FALSE | TRUE
AddPXEServer=FALSE | TRUE
AddDSWebConsole=FALSE | TRUE
DOSFilesPath=c:\dos
DAPath=C:\Program Files\Altiris\eXpress\Deployment Server
SEIPAddress=172.16.2.123