Deployment Solution 33
Post-Installation Configuration
Configure Deployment Server
The Deployment Server Configuration Utility lets you configure advanced settings for the
Deployment Server component.
You can stop, start, or restart the Deployment Server services, update the services
account, and configure additional options. You do not need to perform any configuration
at this time, though you should become aware of the configuration options provided.
To Open the Deployment Server Configuration Utility:
1. Click Start > Programs > Altiris > Deployment Solution > Configuration.
Step 5: Configure Security Settings
See Securing Deployment Solution 6.8 on the Altiris Knowledgebase for an in-depth
discussion of Deployment Solution security.
Step 6: Install the Deployment Agent
The Deployment Agent needs to be installed on all computers you want to manage using
Deployment Solution.
See Deployment Agent Installation (page 34).
Step 7: Configure Automation
If you plan on imaging computers or deploying computers using scripted installs you
need to configure your automation environment.
See Deployment Solution 6.8 Preboot Automation Environment on the Altiris
Knowledgebase for an in-depth discussion of automation.
Step 8: (Optional) Configure PXE Server
Preboot Execution Environment (PXE) is an open industry standard that enables
computers to boot remotely using a network card.
To Next Page
Loading...