Symantec ALTIRIS DEPLOYMENT SOLUTION 6.9 SP4 - V1.0 - Client BIOS Settings for Wake-On LAN and PXE

Deployment Solution 412
Command-Line Switches
SEDataManagerPort=8080
COLocation=local | remote
CORemoteComputerName=DESKPRO4
COUserName=Administrator
COPassword=password
OR
COEncryptedPassword=zlq%r*x+y
PXLocation=dos | local | remote
PXRemoteComputerName=DESKPRO3
PXMakeMasterServer=FALSE | TRUE
PXIPAddress=172.16.2.123
PXDSIPAddress=172.16.2.123
PXPath=c:\Program Files\Altiris\express\Deployment Server
PXCreateDefaultPXEBootFiles=FALSE | TRUE
PXUsername=Administrator
PXPassword=password
OR
PXEncryptedPassword= zlq%r*x+y
WCLocation=local | remote | none
WCPath= c:\Program Files\Altiris\express\Deployment Server
WCRemoteComputerName=DESKPRO5
WCUsername=Administrator
WCPassword=password
WCEncryptedPassword= zlq%r*x+y
WCConsoleManagerPort=8081
Client BIOS Settings for Wake-On LAN and PXE
Some network cards have their own setup utilities. If there is a Wake On LAN option on
your NIC, enable it.
If you want to use Wake On LAN, the motherboard and network card must support
Intel’s Wired for Management (WfM) specification. You will also have to enable the
features in the BIOS. (Settings are hardware specific.Your BIOS might not list all of
these.).
Power Management ON/ENABLED
Suspend/Wake-up Features ON/ENABLED